Production of the new 2.25 ml COP (cyclic olefin polymer) SIN (staked in needle) has begun
The Gx RTF Clear polymer needle syringe is available in the syringe size 1.0 ml and 2.25 ml
Gerresheimer has expanded its range of pre-fillable polymer syringes to include a new product: the Gx RTF ClearJect polymer needle syringe, 2.25 ml. Like the 1.0 ml syringe, this syringe will be produced in Pfreimd, Germany.
The material used for the syringe is a high performance polymer called COP (cyclic olefin polymer). It is suitable for use as primary packaging for sophisticated medications, especially for sensitive, biologicals, biosimilars, and biobetters. The product was developed in close cooperation between two Gerresheimer locations in order to create synergy between the syringe experts in Bünde and the plastic experts in Wackersdorf, Germany.
The Gx RTF ClearJect COP SIN of Gerresheimer Bünde GmbH is now available in the sizes 1.0 ml long and 2.25 ml. The design is inspired by ISO 11040-6 and registered. The syringe is equipped with a 27-gauge, 1/2-inch (12.7 mm), thin-walled stainless-steel needle with three bevels.
COP does not release tungsten metal ions into the medication solution as glass syringes can, which is a major concern for some. Since the entire syringe, including the insert-moulded needle, is produced in a single step, the product, hence becomes free of tungsten and adhesives.The material has a high pH tolerance and the pH value does not change while in storage. The oxygen permeation rate is low in comparison to other plastics, and the values for extractables and leachables are low.
Another important argument in favour of the Gx RTF ClearJect needle syringe is its end-user safety. COP is break-resistant, making it suitable for packaging aggressive or toxic materials. The syringes are siliconised with a precisely controlled quantity of the highly viscous Dow Corning 360 MD (12,500 cST) silicone oil, in order to ensure reliable syringe functionality with low breakaway and sliding forces with the lowest possible particle load.
Production in the injection moulding process ensures precise dimensions. The dead volume in the syringe is also minimised, reducing overall waste of the costly drugs. The material enables a broad range of design options, which make it ideal for customer specific-requirements. The syringes are also engineered for use in autoinjectors thanks to their robustness and precision.
This syringe system, like the 1.0 ml syringe, is economical thanks to the fact that the innovative COP syringe body is designed to use commercially available standard components throughout. This starts with the use of standard cannulas and continues with the piston rods, piston plungers, backstops and closure systems used.