Those looking to buy or relubricate just a few bearings with specialised grease will no longer need to meet minimum order requirements, which can often exceed 1000.
This will support cost-sensitive applications and encourage wide spread use of specialist grease to ensure bearing longevity.
This service will mean any number of standard or specialist bearings can now be sourced and relubricated with specialist grease in accordance with the customers’ application.
Bearing failure is commonly because the wrong quantity or type of grease for the application is used.
Bearings for high speed, high temperature or food grade applications are all assigned the appropriate oils and greases by the technical team at SMB Bearings, whether it is one or 100 bearings.
Chris Johnson, Managing Director at SMB Bearings, said: "Customers may have previously faced minimum order quantities from manufacturers, resulting in them buying bearings in volumes that they do not require. The big manufacturers prefer to produce bearings in bulk. This presents a two-fold problem for those looking to buy non-standard bearings.
"Bearings with non-standard lubricants supplied by many manufacturers are generally only available in large quantities with very long delivery times. The alternative is often to use bearings with a lubricant that is not best suited to the application.
"This is where we come in. Even if customers have purchased shielded bearings that are notoriously difficult to get into, we have bespoke equipment to remove the standard lubrication and replace it with specialised grease, regardless of quantity."
If you are looking to buy or relubricate a small number of bearings, then you will no longer need to spend money on bearings you will never use.