Latest in Drug Delivery

Hovione nearly doubles pharmaceutical spray drying capabilities at Cork, Ireland facility

The CDMO's multi-million investment will allow it to significantly increase its spray drying capacity, which is necessary for inhaled and oral therapeutics

Find out more

Transmission Raman Spectroscopy - access the webinar series today

Offering significant advantages for bulk, quantitative and non-destructive analysis, Transmission Raman Spectroscopy is a preferred choice for applications where surface...
See more

CDMO Adragos Pharma acquires aseptic fill-finish manufacturing expert, Baccinex

Baccinex has significant knowledge in sterile fill-finish processes for both lyophilised and liquid vials

Ardena's Oss nanomedicine facility gains full GMP approval from the Dutch Healthcare Authority

The pharmaceutical manufacturing facility can produce advanced nanoparticle drug delivery systems, including lipid-based, polymeric and metal oxide nanoparticles

Pharmaceutics International bolsters its prefilled syringe production capabilities

The aseptic and oral dosage CDMO has invested USD $3.6m into advanced labelling, fill/finish and automated visual inspection technologies at its Hunt Valley site in Maryland, US

Sanofi invests €40m into biopharmaceutical manufacturing at its Lyon Gerland site

The pharma giant has expanded its French monoclonal antibody production capabilities, while also dedicating €25m to the development of a second-gen polyclonal antibody

Adragos Pharma enhances its sterile injectable production capabilities with new €13m ampoule filling line

The novel line at the CDMO's Livron-sur-Drôme site in France will allow the company to manufacture more than 160 million ampoules for sterile injectables annually

AstraZeneca and Amgen's Tezspire meets primary endpoints in Phase III trial

The Phase III WAYPOINT trial demonstrated Tezspire's ability to reduce nasal polyps and congestion compared to placebo when administered subcutaneously

Bespak and Orbia Fluor & Energy Materials partner to create climate-friendly inhalers

The two companies will create pMDIs with an optimised sustainability profile with Orbia's low global warming potential (GWP) propellant, Zephex 152a

Novel innovation enhances productivity and output for Polish pharma company

A consultative approach to service, delivery and problem solving ensured that a Polish pharmaceutical company received the equipment and technology it needed to ramp up production and expand into new geographies

Latest posts in Drug Delivery

Fujifilm Diosynth Biotechnologies expands its biologic manufacturing capabilities at Hillerød site

The CDMO's first expansion phase introduces six more 20,000 L bioreactors and two downstream processing streams to the facility

Naobios successfully optimises Sumagen's HIV vaccine for industrial production

Naobios will now focus on developing processes for the cGMP manufacture of Sumagen's HIV-1 vaccine candidate

Eli Lilly to leverage ViaNautis Bio's nanovesicle technology for genetic medicine development

ViaNautis' polyNaut nanovesicles can deliver genetic materials to specific tissues or cell types, allowing for more accurate therapeutic targeting

GSK bolsters its US drug manufacturing capabilities with $800m investment

The expansion will double the size and capacity of its Marietta site, supporting the manufacture of sterile liquid vaccines and production for clinical trials

BD and Ypsomed join forces to advance patient-centric, self-administering injectables

The companies will work together to create a subcutaneous autoinjector, which will be optimised to effectively deliver highly viscous biologic drugs

AstraZeneca's Wainzua recommended for EU approval to treat amyloidosis

The neuropathy drug was developed in tandem with Ionis, and has been shown to reduce neuropathy and increase quality of life in the Phase III NEURO-TTransform trial

AbbVie's Parkinson's injectable Vyalev approved by the FDA

The drug proved more efficacious than the traditional oral-based regimen in patients with advanced Parkinson's disease

Naobios and the European Vaccine Initiative team up to manufacture a RSV challenge agent

The CDMO will work with the EVI to manufacture Respiratory Syncytial Virus (RSV) challenge agents for use in viral studies globally

CDMO Kindeva Drug Delivery completes first vial batch at Bridgeton facility

The CDMO plans to install four injectable fill-finish lines at the Bridgeton site, enhancing its annual production capacity to more than 100m units

TurboFil develops automatic assembly and vial-filling system for nasal devices

The UDS Vial Filling & Assembly System can produce up to 100 nasal spray devices per minute

Strides Group launches CDMO OneSource Specialty Pharma at CPHI Milan

The newly integrated CDMO primarily specialises in the manufacture of biologics, drug-device combos and gelatin capsules

BD and ten23 health join forces to optimise aseptic injectable manufacturing

The companies will track prefillable syringes using radio frequency identification (RFID) technology to boost supply chain visibility

Sponsor content

Five critical design elements for Pelton wheel turbine flowmeters

Titan Enterprises outlines the factors for cost-effective and reliable low-flow measurement

Challenges and development perspectives of primary packaging for parenteral drugs

When talking about parenteral drugs, we usually refer to the administration of drugs by injection through the integument or directly into the circulation, says Andrea...

Dissolution of an immediate release nanoparticle formulation using the NanoDis system

An efficient dissolution method to aid in nanoparticle drug development

PacBio launches Vega system, a compact long-read sequencing platform

New benchtop sequencer brings HiFi technology to researchers at $169,000

iotaSciences launches new single-cell cloning platform XT to increase throughput and speed

The platform includes novel AI-powered single-cell verification and monoclonality reporting for gene therapy

New Berry bottle complements preservative-free eye treatment dispensing

Easy-squeeze ophthalmic bottle designed for use with Aptar Pharma’s dispenser

Enzene launches EnzeneX 2.0 technology for biologics at CPHI Milan 2024

New platform enables uninterrupted processing and significant cost reductions

Piramal Pharma Limited reports robust growth in CDMO and sustainability initiatives

US$80 million Lexington expansion to double sterile fill-finish capacity

Integra pipettes drive progress in RAPT Therapeutics’ small molecule inhibitor development

Accelerating R&D for cancer and inflammatory disease treatment

Innovative back pressure regulator launched by Vapourtec

New self-contained, electronically adjustable eBPR does not require external reference gas pressure

Smarter syringe pumps with Syrris

How automated pumps future-proof your chemistry applications

Pharmaworks introduces FR1 robotic feeder for blister machines

New system offers superior flexibility and fast changeovers, ideal for drug delivery devices and consumer goods

Featured companies

Vetter – Your partner in clinical and commercial manufacturing and packaging. Offering Drug Development, Fill and Finish, and CDMO services as well as Analytical Support,... Quotient Sciences is a drug development and manufacturing accelerator providing integrated services across the entire development pathway for small-molecule and peptide drug... Gerresheimer is the global partner for pharmaceutics, biotech, healthcare, and cosmetics with a very broad product range for pharmaceutical and cosmetic containment solutions... For over 30 years, Powder Systems Limited’s solid liquid processing expertise has been fundamental to our success in providing innovative filtration, drying and microsphere...
See more