Clean, dry and quiet

Published: 12-Feb-2010
Manufacturing

To meet the growing demand for clean, dry compressed air in laboratory environments for applications such as image analysis, the Gast Group's range of oil-less JUN-AIR air compressors offer an unrivalled combination of low noise levels, reliability, long life and low maintenance.

Clean, dry and quiet
To meet the growing demand for clean, dry compressed air in laboratory environments for applications such as image analysis, the Gast Group's range of oil-less JUN-AIR air compressors offer an unrivalled combination of low noise levels, reliability, long life and low maintenance.

With decibel ratings as low as 47-55 dB(A) when housed in an attractive soundproof cabinet, models in the oil-less range have the lowest noise levels available, making them ideal for installation within laboratory environments and even in or near individual workstations.

To ensure the highest air quality throughout the lifetime of the oil-less compressor range, receivers are internally powder-coated to avoid corrosion. Adsorption dryers remove moisture to ensure 100% dry, clean oil free compressed air, with pressure dewpoints of -40°C and -70°C. The dryer is located upstream of the receiver so the receiver only stores dry air. Units feature a unique cooling system and wear-resisting piston rings, and are designed for 100% continuous operation up to 10 bar maximum pressure. Higher pressure units are available.

The Gast Group supplies leading instrument manufacturers worldwide with both standard and custom designed units. The range also includes vacuum pumps and the OF300 series, which is supplied as a combined air compressor/vacuum pump. DC versions are available for remote sampling.
See more

You may also like

Manufacturing
Patented device reinvents Solid Phase Extraction

Patented device reinvents Solid Phase Extraction

Read more
Biotech Fluidics announce SPEedy - a device that provides an effortless way to perform Solid Phase Extraction (SPE) sample preparation procedures without need of an external vacuum and compatible with any adsorption chemistry or eluent composition

Trending Articles

  1. Sterling Pharma Solutions doubles ADC manufacturing capacity at Deeside with new GMP suite The multi-million-pound expansion adds a 1400 sqft Grade C cleanroom, OEB5 containment handling and a 3400 sqft analytical laboratory — extending Sterling's bioconjugation capability from development through to Phase III and commercial scale
  2. FDA inspection readiness: Preparing for surveillance and pre-approval inspections Preparing pharma and biotech teams for continuous FDA inspection readiness, mock inspections and proactive regulatory risk management
  3. Hovione to install first ConsiGma CDC Flex continuous tableting line in US The CDMO is investing $35m in a next-generation continuous tableting line at its 89 Twin Rivers facility in New Jersey, creating an integrated US pathway from spray-dried amorphous solid dispersions to commercial tablet production
  4. SCHOTT Pharma makes decarbonisation measurable Validated carbon footprint tool supports informed Scope 3 reduction decisions for pharmaceutical packaging
  5. FDA Form 483 explained: responding to findings and managing regulatory risk Explore what a Form FDA 483 means, how to respond within 15 business days, assess patient risk, address observations and understand how FDA evaluates responses and inspection outcomes

You may also like

Manufacturing
Patented device reinvents Solid Phase Extraction

Patented device reinvents Solid Phase Extraction

Biotech Fluidics announce SPEedy - a device that provides an effortless way to perform Solid Phase Extraction (SPE) sample preparation procedures without need of an external vacuum and compatible with any adsorption chemistry or eluent composition
Manufacturing
Orano Med inaugurates Europe's first industrial-scale lead-212 radioligand therapy facility

Orano Med inaugurates Europe's first industrial-scale lead-212 radioligand therapy facility

The €29m ATLab site will target up to 10,000 doses annually and its two-hour proximity to major European airports meets the critical 24-hour production-to-administration window imposed by lead-212's 10.6-hour half-life
Manufacturing
Lonza advances aseptic spray drying for high-dose biologics

Lonza advances aseptic spray drying for high-dose biologics

This new technology platform addresses stability, concentration, and delivery challenges in biologics, including new modalities
Manufacturing
Catalent launches ten-month gene-to-drug substance programme for complex biologics

Catalent launches ten-month gene-to-drug substance programme for complex biologics

The accelerated pathway extends the CDMO's Rapid Antibody framework to bispecifics and next-generation formats — targeting master cell bank release by month seven and bulk drug substance lot release by month ten
Design & Build
Sterling Pharma Solutions doubles ADC manufacturing capacity at Deeside with new GMP suite

Sterling Pharma Solutions doubles ADC manufacturing capacity at Deeside with new GMP suite

The multi-million-pound expansion adds a 1400 sqft Grade C cleanroom, OEB5 containment handling and a 3400 sqft analytical laboratory — extending Sterling's bioconjugation capability from development through to Phase III and commercial scale
Manufacturing
Piramal Pharma Solutions and NP2 to complete cyclophosphamide development phase next month

Piramal Pharma Solutions and NP2 to complete cyclophosphamide development phase next month

Piramal Pharma Solutions (“PPS”), a leading global Contract Development and Manufacturing Organisation (CDMO) and part of Piramal Pharma Ltd. (“PPL”) (NSE: PPLPHARMA | BSE: 543635), and its partner NP2, a nonprofit generic drug manufacturer, today announced their plans to finish the drug development phase of the generic cancer drug cyclophosphamide in October
Manufacturing
Why your coating process is less consistent than you think - and what to do about it

Why your coating process is less consistent than you think - and what to do about it

Tablet coating defects rarely begin at the coating stage. In this live webinar, industry expert Fred Rowley examines the upstream variables - suspension handling, spray-rate stability, gun pattern verification - that determine whether a coating process performs consistently at scale
Subscribe now