Microtitre plate incubator shakes up life sciences

Published: 23-Mar-2010
Manufacturing

Stuart device is for mixing very small volumes in well plates or micro tubes

The S1505 shaking incubator from Stuart for use with microtitre plates is for mixing very small volumes in well plates or micro tubes.

The device reduces sample evaporation and features state-of-the-art microprocessor detection, setting and control of temperature, according to the laboratory equipment supplier that is part of Bibby Scientific.

The SI505 complements Stuart’s SI500 shaking incubator, incorporating the same digital display, retractable stainless steel platform and USB connectivity for long-term monitoring of the incubator temperature on a PC. Up to four microtitre plates fit on the non-slip mat and accessory racks for different tube sizes are also available.

The integrated timer can be set for any period from 1 second to 9 days and speed and temperature are independently controlled. An easy-to-use digital LED control panel enables temperature to be set between ambient temperature +7ºC and 60ºC, while air distribution is controlled to ensure uniformity throughout the sample chamber.

The SI505 has an orbit of 1.5mm and a maximum speed of 1,250rpm. Stainless steel water trays maintain a humidity of up to 80% in order to minimise sample evaporation.

The device also benefits from BioCote silver-based antimicrobial protection, which reduces the risk of cross-contamination and infection within the laboratory by eliminating surface level bacteria, mould and fungi.

  • Companies:
  • Thermo Fisher Scientific
See more

You may also like

Manufacturing

Thermo Fisher Scientific opens manufacturing centre of excellence site in North Carolina

Read more
New manufacturing facility in Mebane (NC, US) site to significantly increase laboratory pipette production in the US

Trending Articles

  1. Continuous innovation: redefining the future of pharmaceutical manufacturing In an industry in which reliability is paramount and change can be slow, GEA has consistently proven that innovation and stability go hand in hand. Almost two decades ago, GEA introduced the first ConsiGma® continuous manufacturing (CM) system to the pharmaceutical market — a pioneering move that helped to reshape how oral solid dosage (OSD) forms are developed and produced
  2. Abselion launches AAVX and AAV9 Total Capsid Quantification Kits Ready-to-use solution for Amperia benchtop platform supports rapid, reliable quantification across a range of serotypes
  3. diaago and Peak Analysis & Automation partner to bring practical automation solutions to research laboratories Using diaago's customer-first approach with PAA’s decades of expertise in laboratory robotics, the collaboration promises to deliver solutions to streamline workflows, boost throughput and reduce bottlenecks
  4. Suncombe and Kindeva collaborate to deliver low-carbon inhalers to the NHS The partnership will develop next-generation pressurised metered-dose inhalers with low Global Warming Potential propellants, helping the NHS move closer to its Net Zero target
  5. Douglas Pharmaceuticals sets new benchmark for capsule quality with CI Precision Partnership delivers compliance confidence, efficiency gains and reduced waste

Upcoming event

Enhancing probiotic stability through smarter formulation and packaging strategies

18 September 2025 | Virtual See all

You may also like

Manufacturing

Thermo Fisher Scientific opens manufacturing centre of excellence site in North Carolina

New manufacturing facility in Mebane (NC, US) site to significantly increase laboratory pipette production in the US
Manufacturing

Thermo Fisher teams up with Xcellbio to further cell and gene therapy research

The pair will focus on Treg and TIL research, with the intention of developing therapeutics for autoimmune and solid tumour diseases
Manufacturing

Thermo Fisher's Accelerator CDMO and CRO solutions can slash drug development times by 3 years, study finds

The centralised solution can streamline the drug development process, facilitating the rapid commercialisation of new therapeutics
You need to be a subscriber to read this article.
Click here to find out more.
Manufacturing

Accelerating therapeutic manufacturing with smart and sustainable technologies

In this article, John Puglia, Senior Director of Research and Development, Single-Use Technologies, at Thermo Fisher Scientific, explores how innovative technologies are revolutionising biomanufacturing for a smarter, more sustainable future
Manufacturing

Ethris and Thermo Fisher Scientific to provide mRNA technology to biopharma market

Ethris will combine its mRNA technology platforms with Thermo Fisher's GMP manufacturing capacity to serve the biopharmaceutical market
Manufacturing

Thermo Fisher Scientific to invest $2bn into US manufacturing capabilities

The life science service provider will put 75% of the $2bn into its US pharmaceutical manufacturing capacities, helping to produce key medicines for the market
Manufacturing

Thermo Fisher Scientific introduces the 5L DynaDrive Single-Use Bioreactor

First-of-its-kind bench scale bioreactor enabling productivity, scalability and efficiency supporting reduced environmental impact; to simplify and accelerate process development and help bring therapies to market faster
Subscribe now