Niro tablet coater gives even better results

Niro Pharma Systems (NPS) has launched a tablet coating system that achieves a more even tablet coating and makes the production of small batches for r&d more cost effective.

The SuperCell Coating Technology (SCT) is designed to accurately deposit coating materials on tablets - even if they are friable or hygroscopic - and can handle batch sizes as little as 30 grams. The system, due for its first official unveiling in Europe at the upcoming Interpack exhibition, is in the latter stages of development.

NPS claims conventional methods of tablet coating have inconsistent and imperfect results, leading to irregular results that can affect the behaviour of the tablet. This can impart an element of variability that gains in significance if a small run of tablets is being produced for clinical trials.

In conventional coaters, tablets are loaded in large rotating pans and vented for hot air drying, but this means tablet edges can get ground off, intagliations can get filled in by coating material and edges and corners may not be coated with the same thickness as the tablet faces. As a result, these inaccuracies can limit the use of modified release coatings.

The SCT uses a technique in which the tablets are coated with the coating spray in the same direction as the drying gas achieving more efficient and even coating, according to NPS.

Meanwhile, the SCT has an air distribution plate design which means that the tablets move quickly and predictably through the spray zone. This means a small amount of coating material gets added on each pass, which also helps boost the evenness of the result and makes it easier to handle friable or unusually shaped objects.

Another problem with conventional coating is that it requires large batches of tablets - several kilograms - to be coated at one time. This can be wasteful and costly, particularly for r&d of dosage forms. The SCT handles batches from 30 to 120 grams.

Quicker than conventional coaters - taking minutes rather than hours to complete the process - the SCT is suitable for handling very hygroscopic tablets that would degrade if exposed in the coater for extended periods of time.

The accuracy of deposition is great enough that active pharmaceutical ingredients can be layered onto tablets, and uniform layers of taste-masking or modified release coatings can be applied consecutively, within a single batch, says NPS.